October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Wheel Speed Sensor Rear: Installation
- Apply bearing grease (supplied with part) to sensor head shaft and O-ring.
CAUTION:
Ensure that sensor mounting surface on bearing is clean before sensor installation.
- Push sensor head into mounting hole in hub and bearing and align mounting screw hole.
- Install NEW mounting screw (Fig 1
). Tighten mounting screw to 20 N.m (15 ft. lbs.) torque.
Courtesy of DAIMLERCHRYSLER CORP.
- Install hub and bearing with wheel speed sensor as well as all components necessary to access it. (Refer to SUSPENSION REAR
).
- Road test vehicle to ensure proper operation of the base brakes and ABS.