October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Cross-Over Pipe: Installation
- Position cross-over pipe to the manifold connections.
- Position new gaskets and loosely install fasteners.
- Tighten fastener to 41 N.m (30 ft. lbs.).
- Install the cross-over support fastener. Tighten fastener to 41 N.m (30 ft. lbs.).
- Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
- Check the exhaust system for contact with the body panels. Make the necessary ajustments, if needed.