Body Control Module: Installation

Place the BCM onto the mounting bracket.
Install the four screws holding the BCM to the bulkhead (Fig 1).
Connect the five wire connectors to the BCM.
Attach the 72-way bulkhead connector onto the Body Control Module (BCM) mounting assembly.
Install the knee blocker airbag (Refer to AIR BAG RESTRAINT SYSTEMS ).
Install the lower instrument panel silencer.

Fig 1: Identifying Body Control Module
Courtesy of DAIMLERCHRYSLER CORP.

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. (Refer to AIR BAG RESTRAINT SYSTEMS ) FIRST.
Verify vehicle and system operation.