LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Charging System) >> Generator >> Installation >> Installation - 2.4L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 2.4L

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the generator.
  2. Install the accessory drive belt, refer to the COOLING SYSTEM for proper procedures.
  3. Connect B+ terminal to generator.
  4. Install nut holding B+ wire terminal to back of generator.
  5. Connect the push-in field wire connector to back of generator.
  6. Install the EVAP Purge solenoid to its bracket.
  7. Install the Air Box.
  8. Connect the Inlet Air Temperature sensor.
  9. Connect battery negative cable.
scientia non olet · About LEMON Manuals