Push-Button Starter Switch: Removal

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PUSH-BUTTON STARTER

Courtesy of DAIMLERCHRYSLER CORP.

Two screws are used to retain the push-button starter switch. See Fig 1 to the back of the instrument panel.

Remove plastic panel below push-button switch.
Remove electrical connector from back of switch.
Remove two switch retaining screws.
Remove switch from instrument panel.