LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Powertrain Control Module >> Standard Procedure >> Standard Procedure - Pcm/SKREEM Programming >> Programming The Sentry Key Remote Entry Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming The Sentry Key Remote Entry Module

NOTE: Be sure to enter the correct country code. If the incorrect country code is programmed into the Sentry Key Remote Entry Module, it cannot be changed and the Sentry Key Remote Entry Module must be replaced.
  1. Program ignition keys to the Sentry Key Remote Entry Module.
NOTE: If the PCM and the Sentry Key Remote Entry Module are replaced at the same time, all vehicle ignition keys will need to be replaced and programmed to the new Sentry Key Remote Entry Module.
scientia non olet · About LEMON Manuals