LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Transmission Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Module: Removal

Fig 1: Removing/Installing Foam Insulating Panel
GC0034838Courtesy of DAIMLERCHRYSLER CORP.
  1. Un-snap and remove the carpet floor mat.
  2. Fold back the carpeting in the passenger footwell to expose the foam insulation panel.
  3. Remove the foam insulation panel.
    Fig 2: Identifying Retaining Nuts
    GC0034836Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: It is not necessary to remove the electrical connectors to rotate the base plate in the passenger footwell.
  4. Remove the three plastic retaining nuts (1) from the floor panel studs.
  5. Lift the base plate and rotate the top of the base plate toward the rear of the vehicle to expose the TCM.
    Fig 3: Removing/Installing TCM
    GC0034993Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the two retaining screws (1) from the base plate, and disconnect the TCM harness connectors.
  7. Remove the TCM (2) from the base plate.
    8. Fig 4: Removing/Installing Foam Insulation Panel
    GC0034995Courtesy of DAIMLERCHRYSLER CORP.
  8. Un-snap and remove the carpet floor mat.
  9. Fold back the carpeting in the passenger footwell to expose the foam insulation panel.
  10. Remove the foam insulation panel.
    Fig 5: Identifying Retaining Nuts
    GC0034836Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: It is not necessary to remove the electrical connectors to rotate the base plate in the passenger footwell.
  11. Remove the three plastic retaining nuts (1) from the floor panel studs.
  12. Lift the base plate and rotate the top of the base plate toward the rear of the vehicle to expose the TCM.
    Fig 6: Removing/Installing TCM
    GC0034993Courtesy of DAIMLERCHRYSLER CORP.
  13. Remove the two retaining screws (2) from the base plate, and disconnect the TCM harness connectors.
  14. Remove the TCM (1) from the base plate.
scientia non olet · About LEMON Manuals