October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Upstream O2
Courtesy of DAIMLERCHRYSLER CORP.
- Apply anti-seize compound to the threaded portion of the O2 sensor.
- Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
- Connect the O2 sensor harness connector.
- Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
NOTE:
To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
- Connect the negative battery cable.