LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems (Service Information) >> Controls >> A/C Heater Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Heater Control Module: Removal

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN AN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
Fig 1: Removing/Installing Radio
GC0033308Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the radio. (Refer to ELECTRICAL/AUDIO/RADIO - REMOVAL) .
    Fig 2: Identifying Radio Screws & Cover
    GC0033306Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the center console panel screws (1). (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
    Fig 3: Identifying A/C Heater Control Module
    GC0033302Courtesy of DAIMLERCHRYSLER CORP.
  4. Pull out the A/C heater control module by pressing in the catch lugs (1) at the sides.
    Fig 4: Disconnecting/Connecting A/C Heater Control Module Electrical Connector
    GC0033540Courtesy of DAIMLERCHRYSLER CORP.
  5. Disconnect the electrical connector (1) by swinging the retaining bow down.
  6. Remove the A/C heater control module.