When Monitored and Set Condition
- When Monitored: With the ignition on. The Occupant Restraint Controller (ORC) monitors the status of the Passenger Airbag On/Off Switch Signal circuit.
- Set Condition: The DTC will set if a communication fault is detected between the ORC and the Passenger Seat Occupant Simulator.
| POSSIBLE CAUSES |
|---|
| FUSED B(+) CIRCUIT OPEN |
| PASSENGER AIRBAG ON/OFF SWITCH SIGNAL CIRCUIT OPEN |
| PASSENGER AIRBAG ON/OFF SWITCH SIGNAL CIRCUIT SHORT TO VOLTAGE |
| PASSENGER AIRBAG ON/OFF SWITCH SIGNAL CIRCUIT SHORT TO GROUND |
| PASSENGER SEAT OCCUPANT SIMULATOR |
| OCCUPANT RESTRAINT CONTROLLER |
For a complete Restraints System Circuit Diagram, (Refer to ELECTRICAL/RESTRAINTS - SCHEMATICS AND DIAGRAMS) .