LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Airbag Restraint System - Electrical Diagnostics >> DTC Troubleshooting >> Programming Does Not Correspond To The Vehicle Equipment >> When Monitored and Set Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When Monitored and Set Condition

  1. When Monitored: Ignition on.
  2. Set Condition: After the Occupant Restraint Controller (ORC) has been replaced, the Airbag Warning Indicator Light flashes to indicate that the ORC has not been programmed. A DTC is also set at this time.
POSSIBLE CAUSES 
OCCUPANT RESTRAINT CONTROLLER NOT PROGRAMMED
OCCUPANT RESTRAINT CONTROLLER PROGRAMMING ERROR
OCCUPANT RESTRAINT CONTROLLER

For a complete Restraints System Circuit Diagram, (Refer to ELECTRICAL/RESTRAINTS - SCHEMATICS AND DIAGRAMS) .

scientia non olet · About LEMON Manuals