LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Message Systems) >> Electronic Vehicle Info Center >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Electronic Vehicle Info Center: Installation

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Electronic Vehicle Information Center (EVIC) module in the overhead console.
  2. Install the ten screws holding the EVIC module in the overhead console.
  3. Install the overhead console (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION) .
  4. Connect the battery negative cable.
NOTE: If the EVIC module is being replaced, the tire pressure monitoring system (if equipped) must be retrained. (Refer to TIRE PRESSURE MONITORING ).
NOTE: If a new EVIC module has been installed, the compass will have to be calibrated and the variance set. (Refer to ELECTRICAL/OVERHEAD CONSOLE - STANDARD PROCEDURE - COMPASS CALIBRATION) .
scientia non olet · About LEMON Manuals