LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Ignition Coil Capacitor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Coil Capacitor: Installation

  1. Install the bolt to capacitor. See Figure. Make sure that the ground strap is in place.
  2. Tighten bolt.
  3. Install the electrical connector to capacitor.
  4. Connect the negative battery cable.