Compass Mini-Trip Computer: Installation
- Position the CMTC module in the overhead console and connect the electrical connector.
- Install the screws holding the CMTC module in the overhead console.
- Install the overhead console. (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION) .
- Connect the battery negative cable.
NOTE:
If the CMTC module is being replaced, the tire pressure monitoring system must be retrained. Refer to TIRES/WHEELS
for detailed instructions.
NOTE:
If a new CMTC module has been installed, the compass will have to be calibrated and the variance set. Refer toSTANDARD PROCEDURE - COMPASS VARIATION ADJUSTMENT
.