LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Occupant Restraint Controller >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Occupant Restraint Controller: Installation

  1. Position ORC in vehicle.
  2. Install the three retaining screws to the ORC. One on the left side of the floor tunnel, and one in front of (toward bulkhead) and behind (toward vehicle rear) the ORC unit. See Figure. Torque screws to 14.5 N.m (128 in. lbs.).
  3. From the right side of the vehicle, connect the two ORC electrical connectors. See Figure.
  4. Install the left and right forward console closeout panels. See Figure.
    WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. (Refer to ELECTRICAL/RESTRAINTS - DIAGNOSIS AND TESTING - AIRBAG SYSTEM)  FIRST. FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.
  5. Verify vehicle and system operation.
  6. Close hood.
scientia non olet · About LEMON Manuals