LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Throttle Body >> Installation >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Body: Installation: Notes

Fig 1: Removing/Installing Throttle Body
GC0032363Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the PCV hose (1) to the throttle body (5).
  2. Install the throttle body (5) and gasket to engine.
  3. Install the PCV hose bracket and throttle body retaining bolts. Tighten to 20 N.m (15 ft. lbs.).
  4. Connect the throttle body harness connector (3).
  5. Install the throttle body inlet tube.
  6. Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
    NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals