LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Tank >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Tank: Removal

Fig 1: Identifying Fuel Filter/Fuel Pressure Regulator & Fuel Hoses
GC0032316Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the fuel pump splash shield.
  4. Drain the fuel tank. (Refer to FUEL SYSTEM/FUEL DELIVERY - STANDARD PROCEDURE) .
  5. Disconnect the fuel feed hose (4) from the bottom of the fuel tank.
  6. Disconnect the fuel return hose from the bottom of the fuel tank.
  7. Remove the cargo area trim panels.
    Fig 2: Identifying Fuel Tank Level & Pressure Sensor Connectors & Fuel Tank Partition Retaining Bolts
    GC0032323Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove the fuel tank partition retaining bolts (2) and remove the fuel tank partition.
  9. Disconnect the fuel tank level and pressure sensor connectors (1) from the fuel sending unit.
  10. Disconnect the fuel tank filler neck cup seals from the body.
  11. Remove the fuel tank.
    NOTE: Inspect the strainer and O-ring for damage and replace as necessary.
  12. Remove the fuel strainer from the bottom of the fuel tank and inspect.
scientia non olet · About LEMON Manuals