LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Limited, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Removal >> Upstream O2 Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Upstream O2 Sensor

Fig 1: Removing/Installing Upstream O2 Sensor
GC0032360Courtesy of DAIMLERCHRYSLER CORP.
NOTE: The left side O2 sensor is shown. The right side is similar.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover. Grasp both corners of the engine cover, and pull up firmly.
  3. Disconnect the O2 sensor harness connector.
  4. Remove the O2 sensor (1).
scientia non olet · About LEMON Manuals