LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Occupant Restraint Controller >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Occupant Restraint Controller: Removal

Fig 1: REMOVING/INSTALLING OCCUPANT RESTRAINT CONTROLLER (ORC)
GC0043801Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  3. Remove the center console (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
  4. Remove Occupant Restraint Controller (ORC) mounting screws (1).
  5. Disconnect the two ORC 32-way connectors (3).
  6. Remove ORC (2) from vehicle.
scientia non olet · About LEMON Manuals