September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Installation - 2.7L
- Install generator. See Figure.
- Install the 2 upper bolts but do not tighten.
- Install the engine dip stick tube.
- Connect the A/C pressure switch and A/C clutch electrical connectors.
- Connect the B+ terminal and field connectors. See Figure.
- Raise vehicle and support.
- Install the lower bolt and tighten.
- Install the accessory drive belt. Refer to COOLING
.
- Install the accessory drive splash shield.
- Lower the vehicle.
- Tighten the 2 upper mounting bolts.
- Connect the negative battery cable.