LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Heated Seat Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Seat Module: Removal

  1. Move the appropriate power seat track to its uppermost and rearward-most stop position.
  2. Disconnect and isolate the negative battery cable.
  3. Reach under the front of the seat cushion and separate the heated seat module from the seat cushion frame. See Figure.
  4. Disconnect the wire harness connector from the connector receptacle on the back of the heated seat module.
  5. Remove the heated seat module from the vehicle.
scientia non olet · About LEMON Manuals