Compass/Mini-Trip Computer: Operation: Notes

Actuation of the STEP button will cause the Compass Mini-Trip Computer to change mode of operation and actuation of the US/M button will toggle between English and Metric unit of measurement. A reset of the trip computer information is accomplished by actuating the STEP and US/M buttons simultaneously. To reset only the trip condition currently displayed, press and release the STEP and US/M buttons simultaneously for one second until a chime sounds. To reset all trip conditions, hold down the STEP and US/M buttons simultaneously (about 2 seconds) until a second chime sounds and then release the buttons.

The Compass Mini-Trip Computer is active only when the ignition switch is in the ON position. When the ignition switch is turned ON, the Compass Mini-Trip Computer will return to the last function screen that was displayed prior to the ignition being turned OFF.