LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (HVAC Systems) >> Controls >> Blower Motor Resistor Block >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Motor Resistor Block: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the blower motor resistor into the HVAC housing.
  2. Install the two screws that secure the blower motor resistor to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the wire harness connector to the blower motor resistor.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals