LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Electronic Control Modules) >> Body Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Body Control Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the BCM in the vehicle.
  2. Install the four retaining nuts to the BCM.
  3. Connect the five Body Control Module (BCM) electrical connectors.
  4. Connect the battery negative cable.
  5. Install battery compartment cover and install four retaining bolts.
  6. Close deck lid.
  7. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals