LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Electronic Control Modules) >> Powertrain Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

If the PCM is replaced of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the DRBIII® scan tool to change the mileage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set. Refer to POWERTRAIN DIAGNOSTIC PROCEDURES and the DRBIII® scan tool.

  1. Install PCM and tighten bolts.
  2. Install the three connector to PCM.
  3. Install the cleaner assembly, refer to MECHANICAL - 8.3L - VIPER for more information.
  4. Connect negative battery cable and reprogram radio and clock.
  5. Using DRBIII® scan tool, program mileage and vehicle identification number (VIN) into PCM. Refer toPOWERTRAIN DIAGNOSTIC PROCEDURES the DRBIII® scan tool and .
scientia non olet · About LEMON Manuals