LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Electronic Control Modules) >> Central Timer Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Central Timer Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Central Timer Module (CTM) in the vehicle
  2. Reconnect the wire harness connectors to the CTM.
  3. Install the screws that secure the CTM. Tighten the screws securely.
  4. Route the seat belt latch wire lead through the hole in the closeout panel and position the panel beneath the driver seat cushion
  5. Install the screws that secure the closeout panel beneath the driver seat cushion. Tighten the screws securely.
  6. Reconnect the wire harness connector to the seat belt latch connector.
  7. Slide the driver seat to back to its original position.
  8. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals