LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Clock Spring >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clock Spring: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  3. Remove the steering wheel. (Refer to STEERING/COLUMN/STEERING WHEEL - REMOVAL) . Carefully feed all wires over the steering wheel armature to avoid damaging wires. When replacing a deployed Driver Airbag, a new clock spring must be installed.
  4. Remove multi-function switch.
  5. Remove the clock spring by lifting the top lock housing latches up slightly to guide it over the lock housing. The clock spring cannot be serviced and must be replaced if defective, damaged or the vehicle has sustained an impact where the front airbags were deployed.
scientia non olet · About LEMON Manuals