LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Gear >> Power Steering Pressure Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Pressure Switch: Removal

  1. Disconnect the negative cable from the battery. Be sure cable is isolated from negative post on battery.
  2. Raise vehicle.
  3. Locate power steering pressure switch on back side of power steering gear. See Fig 1.
    Fig 1: Power Steering Pressure Switch Location
    GC0031066Courtesy of DAIMLERCHRYSLER CORP.
    1 - WIRING HARNESS CONNECTOR
    2 - POWER STEERING PRESSURE SWITCH
    3 - POWER STEERING GEAR
  4. Remove the wiring harness connector from the power steering pressure switch.
  5. Using a crow foot and long extension, remove power steering pressure switch, from power steering gear.
scientia non olet · About LEMON Manuals