LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Town & Country Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Sliding Door Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sliding Door Control Module: Installation

  1. Position the sliding door control module and install the retaining screw.
  2. Connect the electrical connectors. Slide the locking tab into the locked position.
  3. Install the weather shield.
  4. Install the appropriate door trim panel on the vehicle. (Refer to BODY/DOORS - SLIDING/TRIM PANEL - INSTALLATION)
  5. Connect the battery negative cable.
  6. Using an appropriate scan tool, check and erase any power door control module diagnostic trouble codes.
  7. Verify power door system operation. Cycle the power door through one complete open and close cycle.
scientia non olet · About LEMON Manuals