LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Restraints System (Service Information)) >> Restraints >> Controller-Occupant Restraint >> Removal >> Controller-Occupant Restraint
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Controller-Occupant Restraint

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Occupant Restraint Controller (ORC)
GC0043801Courtesy of CHRYSLER LLC
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, serious or fatal injury.
  3. Remove the center console. Refer to REMOVAL .
  4. Remove Occupant Restraint Controller (ORC) mounting screws (1).
  5. Disconnect the two ORC 32-way connectors (3, referred to as C1 and C2 in the diagnostic information and wiring).
  6. Remove ORC (2) from vehicle.
scientia non olet · About LEMON Manuals