LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Manual Transmission (Service Information) >> Manual - Service Information >> Transmission Front Section >> Assembly >> Assembly - Transmission Front Section
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly - Transmission Front Section

  1. Drive in the sleeves (6) using a mallet.
  2. Install the shift shaft bearing (1).
    NOTE: The input and counter shaft bearings must be fully seated before installing the locking plates.
  3. Install the input shaft bearing (2) and the countershaft bearing (3).
  4. Install the locking plates (5) and bolts (4). Tighten the bolts to 9 N.m (7 ft. lbs.).
  5. Assemble the front and rear transmission sections. See ASSEMBLY .
  6. Install the transmission. See INSTALLATION .
scientia non olet · About LEMON Manuals