Keyless Entry Module: Testing and Inspection

SENTRY KEY REMOTE ENTRY MODULE (SKREEM)

For proper diagnosis and testing of the Sentry Key Remote Entry Module (SKREEM), sometimes referred to as the Wireless Control Module (WCM), Remote Keyless Entry (RKE) System, and the Tire Pressure Monitoring (TPM), use a scan tool and appropriate diagnostic information.

NOTE: After a SKREEM/WCM is replaced, the ignition/transponder keys need to be programmed to the new SKREEM/WCM. Follow the directions on the diagnostic scan tool. The transponder key for the SKREES/SKIM and the RKE will both be programmed during this operation. There is no need to program the fob of the key for RKE functionality once the transponder key is programmed to the new SKREEM/WCM.