LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> 300 V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module - Installation







INSTALLATION





NOTE: USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL IDENTIFICATION NUMBER (VIN) AND THE VEHICLES ORIGINAL MILEAGE. IF THIS STEP IS NOT DONE, A DIAGNOSTIC TROUBLE CODE (DTC) MAY BE SET.

1. Install rubber bumper to PCM.
2. Check pins in electrical connectors for damage. Repair as necessary.
3. Install electrical connectors to PCM.




4. Install mounting bracket to PCM.




5. Install assembly to body. Install bolt and tighten 9 Nm (80 in. lbs.) torque.
6. Connect negative cable to battery.
7. Use the scan tool to reprogram new PCM with vehicles original Identification Number (VIN) and original vehicle mileage.
scientia non olet · About LEMON Manuals