System Specifications

SPECIFICATIONS - 4.7L ENGINE


































CRANKSHAFT MAIN BEARING SELECTION

NOTE: Service main bearings are coded. These codes identify what size (grade) the bearing is.






Main bearing Cap Torque and Sequence






NOTE: Lubricate the bedplate retaining bolts with clean engine oil prior to installation.

Install the bedplate retaining bolts, making sure to place the stud bolts in the correct location, Torque the bolts in the sequence shown.
- Tighten bolts A - L to 54 Nm (40 ft. lbs.)
- Tighten bolts 1-10 to 2.8 Nm (25 in. lbs.)
- Turn bolts 1-10 an additional 90°.
- Tighten bolts A1- A6 to 27 Nm (20 ft. lbs.)

Crankshaft Pulley Torque