LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> Rear Blower Motor Power Module - Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Blower Motor Power Module - Installation







INSTALLATION





1. Position the rear blower motor power module (3) into the rear blower motor housing (4).
2. Install the two screws (5) that secure the power module to the blower motor housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Reconnect the blower motor wire harness connector (1) and the body wire harness connector (2) to the power module.
4. Install the front center floor console cover Installation.
5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals