Speed Control: Servo: Removal: Servo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Speed Control System Components

Courtesy of CHRYSLER LLC

Remove the air cleaner lid and makeup air hose. Refer to REMOVAL .

Fig 2: Identifying Battery Negative Cable
Courtesy of CHRYSLER LLC
Remove the negative battery cable.

Fig 3: Servo Vacuum & Electrical Connections
Courtesy of CHRYSLER LLC

1 - Electrical Connector

2 - Vacuum Line and Nipple
Remove two nuts attaching speed control cable and mounting bracket to servo. See Fig 1.
Remove servo from the mounting bracket.
Disconnect electrical connectors and vacuum hose.

Fig 4: Cable Retaining Clip
Courtesy of CHRYSLER LLC

1 - HAIRPIN CLIP
Remove the engine cover.
Remove cable from throttle cam. See REMOVAL .
Remove the 2 push nuts and discard.
Remove clip attaching cable to servo. See Fig 4.