Charging System (Service Information): Generator: Removal: 2.4L

Fig 1: Generator T-Bolt Locknut And Adjustment Bolt

Courtesy of CHRYSLER LLC

1. Remove the air cleaner lid, disconnect the inlet air sensor and makeup air hose.
2. Disconnect the negative battery cable.
3. Loosen the upper generator T-bolt lock nut.
   Fig 2: Accessory Drive Splash Shield

   Courtesy of CHRYSLER LLC

   1 - ACCESSORY DRIVE BELT SPLASH SHIELD

4. Raise vehicle on hoist.
5. Remove the right front wheel.
6. Remove the accessory drive splash shield.
   Fig 3: Pencil Strut

   Courtesy of CHRYSLER LLC

   1 - PENCIL STRUT

7. Remove the pencil strut (1).
   Fig 4: Lower Pivot Bolt

   Courtesy of CHRYSLER LLC

   1 - LOWER PIVOT BOLT

8. Loosen the lower pivot bolt (1).
9. Loosen the accessory drive belt T-bolt.
   Fig 5: Battery Connection

   Courtesy of CHRYSLER LLC

   1 - FIELD CONNECTOR

   2 - BATTERY CONNECTION

10. Unplug field circuit connector (1) from generator.
11. Remove the B+ terminal nut (2) and B+ terminal.
    Fig 6: Generator Removal

    Courtesy of CHRYSLER LLC
12. Remove the generator belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal .
13. Remove axle shaft. Refer to Differential and Driveline/Half Shaft - Removal .
14. Remove the generator lower mounting bolt and nut from the upper T-bolt.
15. Remove generator from vehicle.