Heater, Engine Block: Removal: 3.6L

Fig 1: A/C Compressor

Courtesy of CHRYSLER GROUP, LLC

Remove the A/C compressor (1) and position aside. Refer to COMPRESSOR, A/C, REMOVAL .

Fig 2: 3.6L Engine Block Heater & Cylinder Block
Courtesy of CHRYSLER GROUP, LLC

The heater block is located on the driver side towards the front of the engine.
Partially drain coolant from radiator and cylinder block. Refer to STANDARD PROCEDURE .
Disconnect the power cord plug from block heater.
Loosen screw (2) from the heater. Remove block heater assembly (1).