Non-Pedestrian Deployment

The following components must be replaced following a non-pedestrian Electronic Pedestrian Protection (EPP) system deployment:

The following components must be closely inspected, then replaced if any damage is visually evident following a non-pedestrian deployment:

EPP impact sensors
EPP impact sensor wiring
Front bumper energy absorber foam material (inspect for compression, cracks and any other signs of deformation or deterioration)
Front bumper support beam (reinforcement)
Front fascia
Front fascia brackets
Hood latch/secondary catch unit
Hood latch striker
Hood panel
Pedestrian bar (see following NOTE )

NOTE:

In order to guarantee continued Electronic Pedestrian Protection (EPP) system integrity, the hood panel MUST be replaced following three EPP deployments, regardless of how the active hood is deployed or the results of any visual inspection.
The pedestrian bar MUST be inspected and replaced if visually damaged following ANY frontal vehicle impact, regardless of whether the active hood is deployed or how the impact occurred.