LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2020 >> 300 Limited, RWD, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Drivetrain Control (DTCM) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module, Drivetrain Control (DTCM): Installation

GC0095226Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Drive Train Control Module (3) on the mounting stud (6) and over mounting stud (5).
  2. Install mounting fasteners (2 and 4) and tighten them to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Secure the drivers footwell carpet back to its installed position.
  4. Install the cowl side trim panel. Refer to PANEL, COWL TRIM, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals