LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2020 >> 300 Limited, RWD, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node (Kin) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module, Keyless Ignition Node (Kin): Installation

GC0144691Courtesy of CHRYSLER GROUP, LLC
  1. Push the Keyless Ignition Node (KIN) into the instrument panel until it snaps into place.
  2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
  3. Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals