Passive Entry (Pe) System

As a preliminary diagnosis for the PE system, first check using the EVIC and the U-Connect™ menu options or with a diagnostic scan tool to be certain that this "Customer Programmable" feature is enabled. Next, confirm that the power lock system and the RKE system operate satisfactorily. If the power lock system or the RKE system fails to operate correctly, repair that problem before attempting to diagnose the PE system.

The diagnostic scan tool can provide confirmation that the CAN data bus is functional, that all of the proper electronic modules are sending and receiving the proper electronic messages over the CAN data bus, and that the RF-Hub is sending the proper RF signals to and receiving the proper RF signals from the door handles to perform its PE system functions. The RF-Hub menu contains the " Door handle verification test  " that can be performed to verify proper connection between the RF-Hub and the door handles as well as a " Key FOB identification  " test to confirm the key being used to test PE is programmed.