LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1984 >> Caravan LE, 2.6 G >> Repair and Diagnosis >> Engine Performance >> System >> 2.2L EFC System >> Removal & Installation >> Spark Control Computer >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Remove battery. Disconnect 10-wire and 12-wire connectors from computer. Disconnect vacuum hose from vacuum transducer.
    NOTE: Do not remove grease from harness connectors or connector cavities in computer. The grease is used to prevent moisture from corroding the terminals. If there is not at least 1/2" of grease on bottom of computer connector cavities, apply liberal amount of Mopar multi-purpose grease (No. 2932524 or equivalent) over entire end of connector plug before reinstallation.
  2. Remove 3 mounting screws that hold computer to fender well. Remove computer. To install, reverse removal procedure.
NOTE: Computer is not serviceable. Do not attempt disassembly for any reason. If vacuum transducer is defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals