September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Airflow Sensor
- Disconnect airflow sensor connector. Unsnap finger clip and remove air cleaner cover. Remove filler from air cleaner body. Remove airflow sensor.
- To inspect, check air cleaner element, case and cover for damage and contamination. Replace if necessary. Check intake air temperature sensor by measuring resistance.
AIRFLOW SENSOR (AFS) RESISTANCE
| Temperature °F (°C) |
Resistance (Ohms) |
| 68 (20) |
2500 |
- Reverse removal procedure to install airflow sensor. Make sure that connector is securely attached.