Power Window Switch

Remove window switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check switch continuity. See appropriate WINDOW SWITCH CONTINUITY table. Replace power window switch as necessary. See Fig 1 or Fig 2 .

Fig 1: Identifying Driver's Window Switch Terminals

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Passenger's Window Switch & Vent Switch Terminals

Courtesy of CHRYSLER CORP.

DRIVER'S WINDOW SWITCH CONTINUITY

Switch Position

Continuity Between Terminals No.

Off

1 & 13; 2 & 13; 3 & 13; 4 & 13; 5 & 13; 6 & 13, 7 & 13; 8 & 13

Driver's Side

8 & 11

Passenger's Side

4 & 9

Down

Driver's Side ⁽¹⁾

6 & 11

Passenger's Side

2 & 9

Auto-Down

Driver Side's ⁽¹⁾

6 & 11

Vent Open

Left

7 & 11

Right

1 & 9

Vent Close

Left

3 & 9

Right

5 & 11

⁽¹⁾	Connect battery voltage to terminal No. 9 and ground to terminal No. 13 before testing.

PASSENGER'S WINDOW SWITCH CONTINUITY

Switch Position	Continuity Between Terminals No.
Off	2 & 5; 3 & 8
Up	4 & 8
Down	4 & 5