LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1997 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.4L >> No Trouble Code Tests >> Test NTC-6A - Checking Map Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test NTC-6A - Checking Map Sensor

NOTE: Perform TEST TC-118A, TC-119A, NTC-1A or NTC-5A before proceeding.
  1. Ensure engine is off. Install vacuum "T" fitting and vacuum gauge on vacuum hose to MAP sensor. See MAP SENSOR LOCATIONS table.
    MAP SENSOR LOCATIONS

    Application (1) Location
    2.4L On End Of Intake Manifold, Near Oil Filler Cap On Valve Cover, Just Above Fuel Rail
    (1) MAP sensor contains a 3-pin connector.
  2. Start engine and allow engine to idle. If engine will not idle, maintain a constant RPM above idle. Using scan tool, read MAP sensor vacuum. Read engine vacuum on vacuum gauge.
  3. If MAP sensor vacuum is not within one in. Hg of engine vacuum on vacuum gauge, replace MAP sensor. Perform TEST VER-2A. If MAP sensor vacuum is within one in. Hg of engine vacuum on vacuum gauge, MAP sensor is operating properly. Test is complete.
scientia non olet · About LEMON Manuals