Checking Fuel Delivery: Notes
WARNING:
The fuel system is under a constant pressure, even with the engine off. Before testing or servicing any fuel system hose, fitting or line, the fuel system pressure must be released. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE
under FUEL SYSTEMS in REMOVAL & INSTALLATION - NEON, SRT-4 & SX (CANADIAN) article.
NOTE:
For circuit identification and wiring diagram, see WIRING DIAGRAMS . If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING
in REMOVAL & INSTALLATION - NEON, SRT-4 & SX (CANADIAN) article. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-1 to ensure system is functioning properly. See the following:
- On 2.0L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATIONS TESTS in SELF-DIAGNOSTICS - NEON & SX (CANADIAN) - 2.0L article.
- On 2.4L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATIONS TESTS in SELF-DIAGNOSTICS - SRT-4 - 2.4L article.