LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> SRT-4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Airbag Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Airbag Control Module: Installation

  1. Connect ACM connector and ensure that the connector and all locking tabs are engaged.
    CAUTION: USE SUPPLIED NUTS ONLY.
  2. Position ACM (arrow pointing forward) in the console floor bracket, attach the nuts and tighten to 9.6 to 14 N.m (85 to 125 in. lbs.) torque.
  3. Install center console assembly. Refer to FLOOR CONSOLE .
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. REFER TO DIAGNOSIS AND TESTING - AIRBAG SYSTEM  FIRST. FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.
scientia non olet · About LEMON Manuals