LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> SRT-4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Driver Airbag >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Driver Airbag: Installation

  1. Connect the airbag squib wire to the driver airbag. Make airbag connection by pressing straight in on the connector. The connector should be fully seated. Feel for positive snap to assure positive connection.
  2. Connect the horn wire.
  3. Place driver airbag into steering wheel airbag cavity.
  4. Install two bolts and tighten to 10 to 11 N.m (90 to 100 in. lbs.) torque.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. REFER TO DIAGNOSIS AND TESTING - AIRBAG SYSTEM  FIRST. FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.
scientia non olet · About LEMON Manuals