LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2006 >> Durango 4.7 P, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Fan-Radiator Viscous >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fan-Radiator Viscous: Installation

  1. Install fan blade assembly to viscous fan drive. Tighten bolts to 23 N.m (17 ft. lbs.) torque.
  2. Position fan blade/viscous fan drive assembly into the radiator shroud.
  3. Install the radiator shroud and fan drive assembly into the vehicle.
  4. Install fan shroud retaining screws. Tighten screws to 6 N.m (50 lbs. in.)
  5. Using Special Tool 6958, install the fan blade/viscous fan drive assembly to the water pump shaft. Tighten mounting nut to 50 N.m (37 ft. lbs.).
  6. Install the upper radiator hose.
  7. Fill cooling system. (Refer to COOLING - STANDARD PROCEDURE) .
  8. Connect battery negative cable.
scientia non olet · About LEMON Manuals